West Control Solutions Pro-16 - Manual (Page 55)

Parameter-Level
9499-040-93811 / 59537-1 Page 55 of 88 Pro-16
SEtP
Name Value range Description Default
SP.LO -1999...9999 Set-point limit low for Weff 0
SP.Hi -1999...9999 Set-point limit high for Weff 900
SP.2 -1999...9999 Set-point 2 0
r.SP OFF/0,01...9999 Set-point gradient [/min] OFF
SP.bo -1999...9999 Boost set-point (see page 72) 30
t.bo 0...9999 Boost time (see page 72) 10
Y.St -120...120 Start-up correcting value (see page 71) 20
SP.St -1999...9999 Set-point for start-up 95
t.St 0...9999 Start-up hold time (see page 71) 10
SP -1999...9999 Set-point (only visible with BlueControl!) 0
g
SP.Lo and SP.hi should be between the limits of rnGH and rnGL
see configuration
r controller page 28
InP.1
Name Value range Description Default
InL.1 -1999...9999 Input value for the lower scaling point 0
OuL.1 -1999...9999 Displayed value for the lower scaling point 0
InH.1 -1999...9999 Input value for the upper scaling point 20
OuH.1 -1999...9999 Displayed value for the lower scaling point 20
t.F1 0,1...100 Filter time constant [s] 0,5
InP.2
Name Value range Description Default
InL.2 -1999...9999 Input value for the lower scaling point 0
OuL.2 -1999...9999 Displayed value for the lower scaling point 0
InH.2 -1999...9999 Input value for the upper scaling point 50
OuH.2 -1999...9999 Displayed value for the upper scaling point 50