West Control Solutions Pro-16 - Manual (Page 85)

9499-040-093811 / 59537-1 Page 85 of 88 Pro-16
MAINTENANCE, REPAIR AND MODIFICATION
The units do not need particular maintenance.
Warning!
When opening the units, or when removing covers or components, live parts
and terminals may be exposed.
Before starting this work, the unit must be disconnected completely.
After completing this work, re-shut the unit and re-fit all covers and components. Check if
specifications on the type label must be changed and correct them, if necessary.
Caution!
When opening the units, components which are sensitive to electrostatic
discharge (ESD) can be exposed. The following work may be done only at
workstations with suitable ESD protection.
Modification, maintenance and repair work may be done only by trained and
authorized personnel. For this purpose, the West Control Solutions / PMA
service department service should be contacted.
Cleaning
Should cleaning be necessary, the front panel should be cleaned by washing
with warm soapy water and drying immediately using a dry, lint free cloth.