5 unplug the power cable and signal cable, 8 replace the side panel and front door panel, 9 plug in the power cable and switch on the server – Toshiba Magnia 550d User Manual
Page 101
Advertising
Connecting Hardware Devices
Hard disk drive (HDD) – SCSI HDD –
84
4 Remove the two screws securing the adapter plate for the 5.25-
inch device bay in order to remove the hard disk drive from the
server. Pull the hard disk drive in the direction of the server’s
front side.
5 Unplug the power cable and signal cable.
6 Remove the hard disk drive together with the adapter plate to
install the 5.25-inch device bay.
7 Fit the 5.25-inch shield cover to the vacant device bay slot and
fasten it with the screw.
8 Replace the side panel and front door panel.
9 Plug in the power cable and switch on the server.
Advertising