Toshiba Magnia 550d - Manual (Page 158)

Installing Software
Windows
® 2000 Server
142
controller MR475) in the floppy disk drive, and press the
<Enter> key.
4 In the window that appears next, select "MegaRAID Express
500 RAID controller Driver" and continue installation.
MEMO: If a RAID controller is connected, be sure to install
RAID controller utilities (Power Console/services/SNMP)
after installation of Windows 2000 Server is completed.
Installation Method
See "MegaRAID Series 493/475 Software Guide."
(Selecting a driver for the network adapter)
The Network Adapter driver must be updated after Windows 2000
Server has been installed without using the Server Setup Tool.
Follow the procedure below to update the Network Adapter driver.
1 Place the following floppy disk created using the Server Setup
Tool in the floppy disk drive.
Use the D-Link 530LTX Windows 2000 Driver floppy disk.
2 Select Network Adapter under "Management Tools" -
"Computer Management" - "Device Manager" in Windows
2000 Server to update the driver.
D-Link DFE-530TX PCI Fast Ethernet Adapter (Rev. B)
For installing, see "Windows NT Server 4.0 First Step Guide."
Installing TOSHIBA Display Power Save Driver
The Server Setup Tool CD-ROM contains the driver installer.
Insert the Server Setup Tool CD-ROM in the CD-ROM drive, and
execute the "Setup.exe" under the directory path "<CD-
ROM>\PUBLIC\UTILS\TOSHIBA\DPS," using Explorer.