Toshiba Magnia 550d - Manual (Page 157)

Installing Software
Windows ® 2000 Server
141
- Adaptec 29160N Windows 2000 Driver (if a SCSI Controller-
Adaptec 29160N is installed)
- D-Link 530LTX Windows 2000 Driver
Selecting disk drivers
(Selecting a driver for the SCSI controller (if a SCSI
controller is installed))
Perform the following procedure if a SCSI Controller-Adaptec
29160N is installed.
1 In the Windows 2000 Server setup screen, press <F6> when
the entire screen turns blue.
2 When the Windows 2000 Server Setup displays a message
asking whether or not to detect large capacity storage devices,
select "S=Skip Detection."
3 Insert the Adaptec 29160N Windows 2000 driver floppy disk
created using the Server Setup Tool in the floppy disk drive,
and press the <Enter> key.
4 In the window that appears next, select "Adaptec Ultra160
Family PCI SCSI controller (29160, 39160, etc.)", and
continue installation.
Selecting a driver for the RAID controller (if a RAID
controller MR475 is installed)
Perform the following procedure if a RAID Controller MR475 is
installed.
1 In the Windows 2000 Server setup screen, press <F6> when
the entire screen turns blue.
2 When the Windows 2000 Server Setup displays a message
asking whether or not to detect large capacity storage devices,
select "S=Skip Detection."
3 Insert the floppy disk labeled "MegaRAID Drivers for Series
493/475 Windows 2000 Driver" (supplied with the RAID