Toshiba Magnia 550d - Manual (Page 160)

Installing Software
Windows
® 2000 Server
144
3 Execute the W2K-631 program under the following directory
using Explorer.
<CD-ROM>\PUBLIC \VIDEO\GIGABYTE \GA620\W2K
4 After the driver is updated, follow the on-screen instructions to
restart the server.
Setting up the network
To ensure correct use of the network, follow the procedure below
to set up the network.
1 Start Windows 2000 and log on as an administrator (or a user
with equivalent rights).
2 If no network has been built up, set up the network.
3 Set up the TCP/IP for the network if necessary.
For setting up TCP/IP, see "Windows 2000 Server First Step
Guide" or its Help.
4 If no SNMP Service has been built up, install the SNMP
Service in the network.
Install SNMP Service in "Add/Delete Windows components"
in Windows 2000.
For installing SNMP Service, see "Windows 2000 Server First
Step Guide" or its Help.
$ When you use the server as the domain controller, Set up the
Active Directory.
See Windows 2000 Server Help
Installing the RAID controller utility
(if a RAID controller MR475 is added)
If a RAID controller is added, and RAID controller utilities
(Power Console/services/SNMP) are not installed, use the floppy
disk or CD-ROM provided with RAID controller to install these
utilities.
See "MegaRAID Series 493/475 Software Guide"