Toshiba Magnia 550d - Manual (Page 95)

Connecting Hardware Devices
Hard disk drive (HDD) – SCSI HDD –
78
8 Take care that the HDD has the correct SCSI ID jumper
settings. Install an additional hard disk drive in the drive carrier
and secure using screws.
Use the screw A supplied with the server.
See “Before you start” on page 43.
Installing a hard disk drive
NOTE: The hard disk drive is easily affected by shock. Do not
apply any shock to it. If the hard disk drive is shocked, the
disk may be damaged and the stored data may be lost.
9 Firmly tighten the eight screws loosened in step 7.