Toshiba Magnia 550d - Manual (Page 116)

Connecting Hardware Devices
Expansion cards
99
Removing PCI expansion card
When removing an expansion card, first read “Before you start” of
this chapter and follow the instructions mentioned below.
1 If the server is in operation, shut it down and switch off the
power.
2 Unplug the power cable.
NOTE: Removing a PCI expansion card when the server is
switched on may cause damage to the server and to the PCI
expansion card.
3 Remove the front door panel and side panel.
See “Removing and replacing the server panels” on page 21.
4 Remove the screw securing the expansion card to the server
and then remove the expansion card.
5 For safe keeping, put the removed expansion card in its
antistatic case.
6 Fit the expansion card panel in to the slot.
7 Replace the side panel and front door panel.
8 Plug in the power cable and switch on the server.