Toshiba Magnia 550d - Manual (Page 141)

System Configuration Setup
BIOS Setup Utility
125
$ OnBoard Serial Port 2 : Auto
Used to specify how to set an assignment for the onboard serial
port 2.
Auto ....................Automatically sets an assignment for the
onboard serial port 2.
3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4
....................Assigns the onboard serial port 2 to each
address.
Disabled..............Sets no assignment for the onboard serial
port 2.
$ Serial Port 2 Mode : Normal
Used to specify whether to use the serial port 2 as an IrDA
port. This item should be set to “Normal”.
$ Duplex Mode : N/A
Used to specify a duplex mode for the serial port: full duplex or
half duplex.
This item should be set to “N/A”.
It can be changed when Serial Port2 Mode is not “Normal”.
$ OnBoard Parallel Port : Auto
Used to specify how to set an assignment for the onboard
parallel port.
Auto ....................Automatically sets an assignment for the
onboard parallel port.
3BC, 378, 278 ....Assigns the onboard parallel port to the
specified address.
Disabled..............Sets no assignment for the onboard parallel
port.
$ Parallel Port Mode : ECP
Used to set the parallel port.
Normal................Sets the parallel port as a normal port.