Toshiba Magnia 550d - Manual (Page 139)

System Configuration Setup
BIOS Setup Utility
123
INTEGRATED PERIPHERALS
This menu allows you to set the operating modes of the I/O (Input/
Output) devices and hard disk drives.
All are recommended settings.
$ OnBoard IDE : Both
Used to set the onboard IDE devices.
Both.....................Enables both the primary and the secondary.
Primary ...............Enables the primary.
Secondary...........Enables the secondary.
Disabled..............Disables both the primary and the secondary.
$ IDE 1 Conductor Cable : Auto
Used to set the type of IDE 1 cable.
Auto ....................Automatically finds the IDE 1 cable type.
ATA66/100.........Sets the IDE 1 cable as ATA66/100 (Confirm
that the IDE device and the cable are ATA66/
100 compatible).
AMIBIOS SETUP - INTEGRATED PERIPHERAL
(C)1999 American Megatrends, Inc. All Rights Reserved
OnBoard IDE :Both
IDE 1 Conductor Cable :Auto
IDE 2 Conductor Cable :Auto
OnBoard FDC :Auto
OnBoard Serial Port 1 :Auto
OnBoard Serial Port 2 :Auto
Serial Port 2 Mode :Normal
Duplex Mode :N/A
OnBoard Parallel Port :Auto
Parallel Port Mode :ECP
Parallel Port DMA :Auto
Parallel Port IRQ :Auto
OnBoard AC’97 Audio :Disabled
OnBoard Legacy Audio :Disabled
Sound Blaster :Disabled
SB I/O Base Address :220-22Fh
SB IRQ Select :IRQ 5
SB DMA Select :DMA1
MPU-401 :Disabled
MPU-401 I/O Address :330h-333h
FM Port (388h-38Bh) :Disabled
Game Port (200h-207h) :Enabled
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Fail-Safe Defaults
F7 : Load Optimized Defaults