Toshiba Magnia 550d - Manual (Page 168)

Installing Software
NetWare
152
Selecting the Network Adapter driver
When the installer detects the network adapter, the following
screen appears.
Select “Modify” to replace the driver.
1 Move the cursor to “Network boards” on the screen shown
above with the arrow keys, and press the <Enter> key.
2 When the “List of network drivers currently selected” appears,
delete the drivers with the <Del> key.
3 Insert the D-Link 530LTX NetWare Driver created with Server
Setup Tool in the floppy disk drive.
4 Select “Add an unlisted driver <Ins>” by pressing the <Insert>
key.
5 Press the <Enter> key to retrieve drivers contained in the
floppy disk.
When the drivers are detected, they are added to the “List of
network drivers currently selected.”
6 Select “DLKFET.LAN.”
|| DLH5X.LAN || ||
The following drivers were detected for this server. Add, change,
or delete device drivers as needed.
Device types Driver names
Storage Devices: IDECD, SCSIHD
Network boards: DLH5X
NetWare loadable modules (optional)
options
_Continue
_Modify