Toshiba Magnia 550d - Manual (Page 109)

Connecting Hardware Devices
SCSI devices
92
9 Take care that the SCSI device has the correct SCSI ID jumper
settings.. Install the SCSI device in the drive carrier and fasten
it with the screw.
Use the screw B supplied with the server.
See “Before you start” on page 43.
Installing a SCSI device
NOTE: The hard disk drive is easily affected by shock. Do not
apply any shock to it. If the hard disk drive is shocked, the
disk may be damaged and the stored data may be lost.
10 Firmly tighten the eight screws that were loosened in step 8.