Toshiba Magnia 550d - Manual (Page 77)

Connecting Hardware Devices
CPU module
60
NOTE: When installing a CPU module, be sure to first unplug
the power cable of the server. Installing a CPU module while
the server is on could cause damage to the server or to the
CPU module.
CPU modules can be seriously damaged by static electricity
because they are precise electronic devices. Before installing
a CPU module, lightly touch a metallic part of the server to
discharge any static electricity from your body.
When replacing a CPU module, first read “Before you start” of
this chapter and follow the instructions mentioned below.
1 If the server is in operation, shut it down and switch off the
power.
2 Unplug the power cable.
NOTE: Replacing a CPU module while the server is turned
on may cause damage to the server or to the CPU module.
3 Remove the front door panel and side panel.
See “Removing and replacing the server panels” on page 21.