Lull 6K Service Manual - Manual (Page 325)

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 6-75
Fig. 6-73: Extension Cylinder Rear Support
6. (Ref. Fig. 6-73) Place a block between the extension cylinder (Item 1)
and the inner boom. Remove two (2) capscrews (Item 4) and
lockwashers (Item 3) securing the extension cylinder to the rear
support (Item 2).
7. Carefully slide the inner boom section out until the lower rear slide
pads are visible in the most forward window of the outer boom section.
8. (Ref. Fig. 6-72) Remove two (2) lower rear slide pads and attaching
hardware from the inner boom section.
9. Support the inner boom section and slide it out from the outer boom
section. Place the inner boom section on work stands in an upright
position.
J
1079
# Description
1 Extension Cylinder
2 Rear Support
# Description
3 Lockwasher
4 Capscrew
1
2
4
3