Lull 6K Service Manual - Manual (Page 33)

Safety
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 1-5
To avoid personal injury…
• Electrolyte in batteries contains sulfuric acid which is a poison and can
cause severe chemical burns. Wear a face shield and safety glasses to
prevent contact with your eyes and face.
• Wear chemical resistant gloves and clothing to keep acid off your skin
and regular clothing.
Important: If electrolyte is ever ingested or splashed into your eyes, get medical
attention immediately. NEVER give fluids that would induce vomiting.
Eyes should be flushed with clean water as soon as possible. If
electrolyte comes in contact with your skin or clothing, immediately
wash it off with a large quantity of clean water.
• Before working on the electrical system, disconnect the battery
cable(s). NEVER check the battery by placing a metal object across
the battery posts; the resulting spark could ignite anything flammable,
causing a fire or an explosion.
• Always disconnect the battery before welding on the machine.
CAUTION: When removing the battery, always remove the negative (–)
cable first. When installing, connect the positive (+) cable first.
Tire and Wheels Hazards
The stability of the forklift can be dramatically affected by incorrect inflation
or the lack of ballast fill. It is good practice to check your tires and wheels
on a daily basis.
Check tires for…
• The correct pressure
• Cuts or bulges
• Nails or punctures
• The proper ballast required
• Uneven or excessive wear.
Check wheels for…
• Condition of valve stems and caps, making sure valve caps are kept on
• Damage to the rims
• Missing or loose lug nuts or bolts
• Obvious misalignment.
All tire service should be performed by a qualified tire service center or by
an authorized person. This person must be properly trained in the
procedures and use of safety equipment designed for tire servicing.
When servicing wheels and tires, remember…
• NEVER over inflate a tire. Over inflation could result in an explosion.
• Punctures that could have allowed the ballast fill in a tire to leak out
must be repaired and the tire refilled with ballast before the forklift is
put back in operation.