Lull 6K Service Manual - Manual (Page 326)

Boom and Transfer
6-76 Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Fig. 6-74: Extension Cylinder Rod End
10. (Ref. Fig. 6-74) Loosen the two (2) setscrews (Item 2) in the extension
cylinder nut (Item 1). Remove the nut and washer (Item 3).
11. (Ref. Fig. 6-74) For models with a 2" diameter rod in the boom
extension cylinder (Item 6), remove the cotter pin (Item 4). Models with
a 2.25" diameter rod do not have a cotter pin; proceed to Step 12.
Fig. 6-75: Hose Connections at Extension Cylinder
Note: “K" Model machines are not equipped with auxiliary hydraulics. For these
models, disregard procedures that refer to auxiliary hydraulic components.
J
1080
1
2
3
6
5
4
# Description
1 Nut
2 Setscrew
3 Washer
# Description
4 Cotter Pin
5 Mounting Block
6 Extension Cylinder
J
1081
Carriage
Extension
Auxiliary
Fittings
Cylinder
Tilt Hoses
Hydraulic Hoses