Lull 6K Service Manual - Manual (Page 327)

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 6-77
Fig. 6-76: Rear Boom Extension Cylinder Mount Support Installation
12. (Ref. Fig. 6-76) Support the boom extension cylinder and remove the
two (2) capscrews, lockwashers, and flatwashers securing the rear
mount support to the outer boom.
13. (Ref. Fig. 6-75) Slide the extension cylinder back about a foot. Tag and
disconnect two (2) carriage tilt and two (2) auxiliary hydraulics hoses
from the fittings at the extension cylinder. Cap hoses and fittings.
Fig. 6-77: Hose Carrier to Tray Attachments
14. (Ref. Fig. 6-77) Slide the extension cylinder out until the lower hose
carrier attachments are accessible. Remove four (4) screws,
lockwashers, and flatwashers securing each hose carrier to the hose
tray.
J
1276
Capscrew
Lockwasher
Flatwasher
Rear Mount
Support
J
1082
Screw
Lockwasher
Flatwasher
Hose Carrier
Extension Cylinder
Hose Carrier
Hose Tray
Mounting Block