IKA labworldsoft - Manual (Page 103)

- 103 -
1. Call up the parameters window by double clicking on the icon.
The parameter window then appears. In the basic setting analog port 1 is activated.
2. Set general parameters (port code, designation of the digital/analog converter).
3. Activate additional analog ports by clicking the corresponding control fields.
Assigning Analog Devices
Carry out the following instructions:
1. Call of downstream parameter window by clicking 6HWXS . The parameter window then
appears.
2. Select the desired analog device from the list by clicking the list entry. The selected list
entry will appear in inverse format.
3. Assign the analog device to a port which is not in use by clicking the corresponding arrow
key. The designation of the analog device appears in the adjacent window.
4. Assign additional analog devices in the same manner.
5. Use 2. to confirm the entries and close the two parameter windows.