IKA labworldsoft - Manual (Page 118)

- 118 -
,.$ :HUNH 3$ GLJLWDO
Peristaltic pumps are used as dosing, feed or suction pumps in all laboratory fields.
A large selection of interchangeable heads makes it possible to process gaseous, liquid, solids-
bearing, aggressive or abrasive media.
Sterile work is ensured through the use of sterile hoses.
A large selection of hoses makes it possible to perform dosing in the range of 0.0006 ml/min up to
more than 50 ml/min
The corresponding input and output paths are marked by means of digit fields.
&RQWURO
1. Input path for speed/flow rate.
The setpoint for the speed (1/min) or the flow rate (ml/min) is provided here as a function of
the selection fields setting: dosing 1/min or dosing ml/min
0HDVXUHG YDOXHV
1. Actual speed or Actual flow rate in 1/min or ml/min
2. Total volume
127(
Detailed information on the instrument features may be found in the separate operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set
to the following values:
 %DXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ QRQH KDQGVKDNH QR +6