IKA labworldsoft - Manual (Page 131)

- 131 -
.QLFN 3RUWDPHVV  2[\
The Oxymeter Portamess 913 Oxy is used to measure oxygen concentration.
0HDVXUHG YDOXHV
1. Temperature in °C.
2. Oxygen concentration [mg/l]
3. Saturation index [%]
1RWHV
Detailed information on the laboratory thermostat features may be found in the separate operating
manual.
For proper communication the transmission parameters of the unit serial interface have to be
set to the following values:
 EDXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ HYHQ KDQGVKDNH QRQH