IKA labworldsoft User Manual
Page 108
- 108 -
,.$ :HUNH (85267$5 32:(5 FRQWUROYLVF
The EUROSTAR POWER control-visc is a high-torque stirrer for use up to the high-viscosity range.
The maximum torque at the chuck is 60 Ncm and the speed ranges between 50 and 2,000 rpm.
In the parameter window of the EUROSTAR POWER control-visc the desired controlling variables
and the readable measured values can be activated. The corresponding input and output paths are
marked with number fields. In the basic setting the output path 1 is set for reading out the rated
speed.
Control
1. Input path for rated speed.
2. "Mode" input path for switching between the speed and torque display. The torque display
is reset to 0.
3. Measured values
1. Rated speed in rpm.
2. Real speed in rpm.
3. Torque trend, relative in Ncm.
1RWH
Please see the separate operating instructions for a description of the detailed characteristics of
the stirrer.