IKA labworldsoft - Manual (Page 128)

- 128 -
. .QLFN &RQGXFWRPHWHU 
The laboratory conductometer 703 from the Knick company is used for electrolytic conductivity
measurement in laboratories.
The device may be optionally operated with 2-pin or 4-pin measuring cells and offers a measuring
range from < 1.00 uS/cm to > 1000 mS/cm.
Either PT 100 or PT 1000 temperature sensors may be used for measuring temperature.
0HDVXUHG YDOXHV
1. Temperature in °C
2. Conductivity in S/cm.
127(
Detailed information on the measuring instrument features may be found in the separate
operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set
to the following values:
 %DXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ HYHQ KDQGVKDNH QRQH