IKA labworldsoft - Manual (Page 27)

- 27 -
If a new signal flow chart is to be generated, previously saved configurations can also be used. By
saving the old configuration under a new name and specifically changing functional units or
parameters, a new signal flow chart can generally be produced with minimum operating effort.
Naturally, the effort required depends on how similar the new signal flow chart is to the old one.
Proceed as follows:
1. Click on the "Open Document" action button (Windows standard symbol). A dialog box for
selecting the configuration files is opened.
2. Click on the desired configuration file in the list.
3. Confirm the selection with
2. .
The dialog box closes and the selected configuration (signal flow chart) appears in the
working area. The file name appears in the header bar of the main ODEZRUOGVRIW window.
1RWH
The "Open Document" action button corresponds to the menu command 2SHQ in the "File"
pulldown menu.
Creating new file
A directory has already been set up on the hard disk for creating new configuration files (e.g.
c:\labworld\data\...).
Proceed as follows:
1. Click on the "New Document" (Windows standard symbol) action button. A dialog box for
entering the file name opens.
2. Enter an individual ILOH QDPH under which the current configuration is to be managed.
3. Confirm the entry with 2. .
1RWH
The "New Document" action button corresponds to the menu command 1HZ in the "File"
pulldown menu
File Manager
The File Manager is an expanded dialog box for searching and opening a previously saved
measurement sequence schedule .
Since file names in the present version have to comply with the usual DOS conventions
(maximum 8 + 3 characters) it is not always easy to find a particular measurement sequence
schedule in large directories.
The File Manager not only displays files and directories on the hard disk, but also the information
stored under Summary Info Summary Info when you are accessing a ODEZRUOGVRIW
measurement sequence schedule.
In this way a particular measurement sequence schedule can be identified without the file name
being known or having to first load it into ODEZRUOGVRIW ..