IKA labworldsoft - Manual (Page 140)

- 140 -
0HWWOHU7ROHGR &RQGXFWRPHWHU 0& 
The Conductometer MC 226 is used to measure condcutivity.
0HDVXUHG YDOXHV
1. Conductivity
2. Temperature in °C.
127(
Detailed information on the laboratory thermostat features may be found in the separate
operating manual.
For proper communication the transmission parameters of the unit serial interface have to be
set to the following values:
 EDXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ HYHQ KDQGVKDNH QRQH