IKA labworldsoft - Manual (Page 26)

- 26 -
5. etc.
1RWH
After opening the dialog box, Channel 1 is already set for entering the description.
&RQWUROOLQJ PHDVXUHPHQW VHTXHQFH
After setting the parameters, the measurement can be started with a mouse click. The measured
values are continually read out and processed further or displayed by the result unit. The number of
available measured values can be set via the sampling time. In the basic setting two measured values
are made available per second, which corresponds to a sampling time of 500 ms.
The measurement sequence can be controlled manually or automatically:
 manually with a mouse click
 in accordance with a specified time window
 All functions related to measurement sequence control are accessible via the Measure
pulldown menu (menu bar). Action buttons are provided in the icon bar for frequently used
functions.
 The main steps for controlling a measurement sequence are described with the following
points.
Saving file
To save the configuration files, a path has already been created on the hard disk which can be
expanded; e.g. c:\labworld\data\ ... (the current drive is dependent on the program installation).
To differentiate from other files managed by labworldsoft (e.g. ramp files), the configuration files have
the extension *.con.
The files are managed via a standard dialog box for file selection.
Proceed as follows:
1. Click on the "Save Document" (Windows standard symbol) action button. A dialog box for
entering the file name opens.
2. Enter individual )LOH QDPH under which the current configuration is to be managed.
3. Confirm the entry with 2. . The file name appears in the header bar of the main
ODEZRUOGVRIW window.
1RWH
The "Save Document" action button corresponds to the menu command 6DYH DV in the "File"
pulldown menu.
Opening file