IKA labworldsoft - Manual (Page 133)

- 133 -
/DXGD /DERUDWRU\ 7KHUPRVWDWV
Highly precise, processor-controlled laboratory thermostats for direct and indirect tempering.
&RQWURO
1. Input path for set temperature.
2. Input path for set pump output (only for Ecoline).
0HDVXUHG YDOXHV
1. Set temperature in °C.
2. Actual temperature in °C:
3. Actual external temperature 1 in °C (only for the P series).
4. Actual external temperature 2 in °C (only for the P series).
5. Actual pump output as a numerical value (only for Ecoline).
Via three option push-buttons control for P thermostats can be switched between the internal
sensor and two external sensors.
Ecoline thermostats also make it possible to deactivate the device keypad via remote operation.
127(
Detailed information on the laboratory thermostat features may be found in the separate
operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set
to the following values:
/DXGD 3 /DERUDWRU\ 7KHUPRVWDWV
 %DXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ QRQH KDQGVKDNH 576&76
/DXGD (FROLQH 7KHUPRVWDWV
 %DXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ QRQH KDQGVKDNH 576&76