2iiolqh judsk glvsod – IKA labworldsoft User Manual
Page 72
- 72 -
2IIOLQH JUDSK GLVSOD\
With the "Offline" graph display result unit controlling variables can be recorded "offline", i.e. without
the usual laboratory instrument environment. This makes it possible to test and optimize the behavior
of the control sequences over time with a simulation prior to the actual measurement with the real
laboratory instrument. The signal flow for such a test consists of the "Offline graph display" and the
"Read files" control unit .
The display possibilities of the "Offline graph display" result unit are basically the same as those of the
normal graph display . In addition, supplementary display functions are also available.
A
=RRP IXQFWLRQ
for magnifying interesting curve sections.
A
6FUROO EDU
for scrolling the curve over the time axis. This is of interest for long control
sequences.
Proceed as follows:
1. Open the parameter window of the result unit by double clicking on the appropriate
symbol.
2. If required, enter the
0RGXOH QDPH
in the ’Description’ text field.
3. Set the
1XPEHU RI FKDQQHOV
with the upper arrow buttons.
4. Select the channels with the lower arrow buttons.
5. Enter the
'HVFULSWLRQ
,
8QLW
(e.g. rpm) and
0LQLPXP
and
0D[LPXP
value of the Y-scale
for each channel.
6.
$FWLYDWH
the channel with the control field so that results appear in the result window.
7. Close the parameter window with
2.
. The result window appears as a symbol (icon) at
the bottom of the screen.
8. Open the result window by double clicking on the icon. The result window appears in the
normal size with the current scale.
The individual setting of the graph display is described under the following topics: