General information, starting and exiting program – IKA labworldsoft User Manual
Page 7
- 7 -
General information, starting and exiting program
The labworldsoft program is operated with the mouse or the keyboard in the same manner as all
Windows applications.
If labworldsoft is to be started whenever Windows is started, then copy or drag the "labworldsoft "
application icon into the "Auto start" window.
Close other programs running in the background so that labworldsoft can function without sacrificing
speed during operation.
6WDUWLQJ SURJUDP
Proceed as follows:
1. Switch on the connected laboratory instruments.
2. Switch on the computer.
3. Start Windows.
4. Start the program by double clicking on the
ODEZRUOGVRIW
application symbol.
After the opening screen, which appears for approx. 5 seconds, the main application
window of the
ODEZRUOGVRIW
program appears.
([LWLQJ SURJUDP
Proceed as follows:
x
Press the key combination "Alt" + "F4" or
x
Select the "Exit" command in the File menu (menu bar) or
x
Double click on the system control menu box in the upper left-hand corner of the main
application window.
x
x
After carrying out one of the above possibilities, the program can be exited properly. An on-
going measurement is ended and the current setting is saved in the file *.ini. Following a new
start, the last valid parameters are available again.
x