IKA labworldsoft - Manual (Page 60)

- 60 -
)XQFWLRQ EORFN YLVFRVLW\
This functional group allows calculation of the viscosity.
The viscosity is derived from
- the speed [rpm] Input 1,
- the torque [Ncm] Input 2,
- the selected stirring element,
- the density of the medium,
- and the bearing friction.
Proceed as follows:
1. Call up the parameter window by double-clicking the symbol.
2. If necessary, enter the Module name in the text box. It is advisable to assign names if
several viscosity blocks are used.
3. Select the desired stirring element by clicking the appropriate item from the list.
4. Enter the density of the medium [g/cm³].
5. Select the appropriate bearing friction curve.
6. Confirm the entries with OK.