IKA labworldsoft - Manual (Page 18)

- 18 -
Designing the tool bar customer-specifically
The tool bar can be assigned as required with all of the function blocks available in labworld VRIW .
Clicking with the right mouse button on the function block to be replaced gives you a dropdown list
of all available function blocks. The selected block is then automatically accepted into the tool bar.
Multiple application-specific tool palettes can be defined and saved under the menu item (GLW
7RROEDU . In addition, the basic setting can be restored at any time with (GLW 'HIDXOW VHWWLQJ .
1RWH
After selecting a functional unit not all possible input and output paths (number fields) are shown
at first, but instead a minimum configuration is activated. This configuration corresponds to the
basic setting after starting the program. Required paths for generating the signal flow chart must
be activated in the parameter window if necessary. It is generally possible to select several
inputs and outputs or channels via the parameter window.
Positioning functional units
Carry out the following actions with the left mouse button:
1. Click on the functional unit with the mouse.
2. Hold down the mouse button and move the functional block to the desired position.
During moving the mouse pointer changes its symbol (---> crossed double arrow).
3. Release the mouse button.
4. Click on the next functional unit (averaging) and move it etc.
5.