6shfli\lqj froruv dqg olqh zlgwk, Specify colors, Specify line width of measuring curve – IKA labworldsoft User Manual
Page 71
- 71 -
Measured values can be read out at any point on the curve with vertical cursor lines. The left-hand
cursor line forms the intersection (y1/t1) with the curve, while the right-hand cursor line forms the
intersection (y2/t2). The intersections are displayed numerically and the differential values y2 – y1 and
t2 – t1 appear.
Proceed as follows:
1. Switch the result window from its normal size to its maximum size.
2. Switch on the cursor lines with the
(YDOXDWLRQ
pulldown menu. Two vertical lines appear.
3. Select the curve the cursor is to act on:
Click on the
%R[
with the
&RORU
of the curve to be examined. The numerical value of the
current intersection appear below the graph field.
4. Grab the cursor with the mouse (click on it and hold down the mouse button) and move it
to the desired position. The numerical values of the current cursor position are displayed
continuously.
6SHFLI\LQJ FRORUV DQG OLQH ZLGWK
Proceed as follows:
Specify colors
1. Open the
'LVSOD\ PRGH
pulldown menu in the menu bar.
2. Click on
&RORUV DQG OLQHV
to open the dialog box for entering colors.
3. Click on the desired element for which the color is to be changed in the list of parameters.
4. Open the color palette by clicking on the
&RORU
action button. Additional dialog boxes with
color palettes are opened (basic colors, mixed colors).
5. Select the desired color and confirm it with
2.
.
6. Click on the next element in the parameter list ... continue with Point 4.
Specify line width of measuring curve
1. Click on the element
,QSXW
(for Measuring Curve 1) in the parameter list.
2. Set the number in the 'Line width' entry field in accordance with the desired line width:
narrowest line width (basic setting)
broadest line width
3. Confirm the entries with
2.
.