Hlgrosk 3xpsv – IKA labworldsoft User Manual
Page 92
- 92 -
+HLGROSK 3XPSV
Peristaltic pumps are used as dosing, feed or suction pumps in all laboratory fields.
A large selection of interchangeable heads makes it possible to process gaseous, liquid, solids-
bearing, aggressive or abrasive media.
Sterile work is ensured through the use of sterile hoses.
A large selection of hoses makes it possible to perform dosing tasks over a large range.
The corresponding input and output paths are marked by means of digit fields.
&RQWURO
1. Input path for speed/flow rate.
The set value for the speed (1/min.) or the flow rate (ml/min.) is provided here as a
function of the selection fields setting: dosing 1/min. or dosing ml/min.
The range: "Flow rate as a function of......." the dialog provides an overview of the flow rates
which may be expected as a function of the pump head and speed.
Select the corresponding combination from the field "HeadID / HoseID" in order to obtain
information about the flow rates which may be expected.
2. Volumetric feeding
3. Starting volumetric feeding.
0HDVXUHG YDOXHV
1. Actual speed or Actual flow rate in 1/min. or ml/min.
127(
Detailed information on the instrument features may be found in the separate operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set to
the following values:
%DXG VWDUW ELW GDWD ELWV VWRS ELW SDULW\ QRQH KDQGVKDNH QRQH