IKA labworldsoft - Manual (Page 74)

- 74 -
<; JUDSKLF GLVSOD\
Measuring data for completed measurement cycles can be displayed using the Y/X graphic display
result block. This allows measuring data to be displayed not only for time but also for any physical
variables. Correlations, e.g. increase in speed resulting from an increase in speed, become more
distinct. The measuring sequence plan for such a test comprises the "Y/X graphic display" and the
"Read files" control unit . The display possibilities of the "Y/X graphic display" result block are the
same as those for the standard graph display .
Proceed as follows:
1. Call up the parameter window for result block by double-clicking the appropriate symbol.
2. If necessary, enter a Module name in the "Name" text box.
3. Assign the channels to the Y and X axes.
4. Enter the Name, Unit (e.g. rpm) for each input.
5. Close the parameter window with OK. The result window is visible as a symbol (icon) at the bottom
of the screen.
6. Display the result window by double-clicking the icon. The result window appears in normal size
with the current scaling.
Information concerning configuration of the graphic display can be found under the following topics: