IKA labworldsoft User Manual
Page 13
- 13 -
x
Use the "Tab" key to reach the desired option group.
Press the "space bar".
&RQWURO ILHOGV
Certain options can be switched on or off with control fields. The selected option is marked with an "X".
6HOHFWLQJ RU FOHDULQJ RSWLRQV
Proceed as follows:
x
Click on an empty control field to select the option.
Click on the control field again to clear the option.
RU
x
Use the "Tab" key to reach the desired control field.
RU
x
Press the "space bar" to mark the control field with an X.
1RWH
Unavailable options are faded out.
7H[W ILHOGV
Normally, the test fields contain standard designations which, for example, describe a function. To
distinguish between several functional units of the same type on the working area, the texts may be
replaced with individual descriptions.
/LVW ILHOGV
A list field first appears as one line and contains the current selection, e.g. "rpm" when the unit of
rotational speed is concerned. The menu generally also contains other units, such as °C or Ncm. The
available selection possibilities in the list are opened when the arrow to the right of the field is clicked.
Some list fields can also be supplemented with individual entries, e.g. with user-specific parameter
values (floating point numbers). Make sure that the new entry does not exceed the specified value
range. If the value lies outside the upper or lower limits, a fault message appears.
6HOHFWLQJ OLVW HQWU\
Proceed as follows:
x
Click on the scroll arrow until the desired element appears in the list field.
Click on the element to be selected.
RU
x
Use the "Arrow" keys to reach the desired element.
Press the "Enter" key to adopt the selection.