Ruqlqj s+lrq phwhu – IKA labworldsoft User Manual
Page 77
- 77 -
&RUQLQJ S+LRQ PHWHU
pH meter for two independent measuring points with temperature compensation.
0HDVXUHG YDOXHV
1. pH value measuring sensor A
2. pH value measuring sensor B
3. Compensation temperature in °C
127(
Detailed information on the instrument features may be found in the separate operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set to
the following values:
%DXG UDWH %DXG
In addition, the
6\VWHP _ 'DWD ORJJHU
function must be set to
RQSULQW RQO\
.
The response times of this device is 2200 ms for each activated measured value. If all outputs are
activated then the minimum possible measuring rate increases to 6600 ms. If a lower scanning rate
has been selected by the user, then it is automatically corrected when the measurement is started
with
ODEZRUOGVRIW
.