IKA labworldsoft - Manual (Page 35)

- 35 -
3XVK EXWWRQ FRQWURO XQLW
Functions can be reset or switched over with the Push button. This includes, for example, the
switching over of the EUROSTAR- display (stirrer) from speed to torque. The push button can be
individually labelled (maximum of 13 characters).
Proceed as follows:
1. Open the parameter window by double clicking on the symbol.
2. If necessary, enter the
1DPH of the push button in the ’Designation’ text field.
3. Close the parameter window with 2. . The designated control window appears as a
symbol (icon) at the lower edge of the screen.
4. Open the control window by double clicking on the icon.
5. The push button can be actuated by pressing the
 action button; this resets or switches
over functions.