Hilqlqj wlph dqg <vfdohv, 6fdolqj wlph d[lv, 6fdolqj <d[lv – IKA labworldsoft User Manual
Page 69
- 69 -
'HILQLQJ WLPH DQG <VFDOHV
The time axis is dependent on the current measurement duration and must be set separately (menu
bar of result window). The y-axis can be assigned with a maximum of four scales in accordance with
the selected number of channels. For better clarity the scales have the same color as the related
measuring curves.
Two cursor lines, which can be moved over the time axis, are used to evaluate the curves.
The individual setting of the scales is described under the following points.
6FDOLQJ WLPH D[LV
Proceed as follows:
1. Open the
$[HV
pulldown menu in the menu bar of the result window.
2. Open the window for entering the time by clicking on
7LPH VFDOH
in the pulldown menu.
3. Enter the desired
7LPH
(in minutes) in the text field and confirm it with
2.
.
1RWH
In the basic setting the time axis is set to 30 minutes. The value can be changed if necessary.
6FDOLQJ <D[LV
Depending on the measuring variables and the number of channels to be displayed, the scale
parameters can be set individually.
Proceed as follows:
1. Open the
$[HV
pulldown menu in the menu bar of the result window.
2. Open the Y-scale window by clicking on
<VFDOH
in the pulldown menu.
6SHFLI\ WKH VFDOH IRU WKH ILUVW FKDQQHO
3. Select Curve1 in the ’Channel’ field by clicking on the appropriate list entry.
4. If necessary, change the
1DPH
of the channel in the ’Description’ text field.
5. Enter the desired
8QLW
(e.g. °C, Ncm etc.) in the text field.
6. Enter the
0D[LPXP
and
0LQLPXP
value of the y-scale in the list fields.