IKA labworldsoft - Manual (Page 142)

- 142 -
0HWWOHU7ROHGR S+ 0HWHU 03  0$ 
The laboratory pH-Meter MP 123 is used to measure pH
The laboratory pH-Meter MA 130 is used to measure pH-, redox-, ion concentration and temperature.
0HDVXUHG YDOXHV
1. pH-value in pH....
2. Temperature in °C.
127(
Detailed information on the laboratory thermostat features may be found in the separate operating
manual.
For proper communication the transmission parameters of the unit serial interface have to be set to
the following values:
 EDXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ QRQH KDQGVKDNH QRQH