IKA labworldsoft - Manual (Page 132)

- 132 -
.QLFN 3RUWDPHVV  S+
The pH Meter Portamess 913 pH is used to measure pH
0HDVXUH YDOXHV
1. pH value
2. Electrode potential [V]
3. Temperature PT100/PT1000 [°C]
1RWHV
Detailed information on the laboratory thermostat features may be found in the separate operating
manual.
For proper communication the transmission parameters of the unit serial interface have to be
set to the following values:
 EDXG  VWDUW ELW  GDWD ELWV  VWRS ELW SDULW\ HYHQ KDQGVKDNH QRQH