Electrical, Control, Input/output ratings – Rockwell Automation 1336Z SPIDER - FRN 2.xxx-5.xxx User Manual
Page 148
A–2
Specifications and Supplemental Information
Electrical
Input Data
Voltage Tolerance:
–50% of maximum (with reduced output power),
+10% of maximum.
Frequency Tolerance:
47-63 Hz.
Input Phases:
Three-phase input provides full rating for all drives.
Displacement Power Factor
0.97 standard, value is application dependent.
Efficiency:
97.5% at rated amps, nominal line volts.
Max. Short Circuit Current Rating:
Using Specified Fuses
200,000A
Total Harmonic Distortion (THD):
acc. IEEE519/EEN61800-3
Control
Method:
Sine coded PWM with programmable carrier frequency. Ratings
apply to all drives (refer to the Derating Guidelines on page A–3).
200-240V AC Drives
2, 4, 8 kHz.
380-480V AC Drives
2, 4 kHz.
Output Voltage Range:
0 to rated voltage.
Output Frequency Range:
0 to 400 Hz.
Frequency Accuracy
Digital Input:
Within
±
0.01% of maximum output frequency.
Analog Input:
Within
±
0.4% of maximum output frequency.
Selectable Motor Control:
Sensorless Vector with full tuning. Standard V/Hz with full custom
capability.
Accel/Decel:
Two independently programmable accel and decel times. Each time
may be programmed from 0 - 3600 seconds in 0.1 second
increments
1
.
Intermittent Overload:
Variable Overload (see Drive Ratings).
Current Limit Capability:
Proactive Current Limit programmable from 20% to peak current of
rated output current. Independently programmable proportional and
integral gain.
Inverse Time Overload Cap.
Class 10 protection with speed sensitive response. Investigated by
U.L. to comply with N.E.C. Article 430. U.L. File E59272, volume 4/6.
1
0.1 second increments using a HIM or 0.01 with serial communications.
Input/Output Ratings
Note: Drive ratings are at nominal values. See Derating Guidelines on
page A–3.
2
Values based on line source, kVA = 10 x Drive Output kVA.
Drive
Catalog No.
1336Z- . . .
Synchronous Reluctance Motor
cos
ϕ
= 0.6
Input Amps
2
Output kVA
Output Amps
200-240V DRIVES
xA022
xA036
xA060
7.6
12.5
24.6
3.7
6.2
12.5
9.0
15.0
30.0
380-480V DRIVES
xB010
xB017
xB033
8.7
11.4
19.8
8.2
10.8
19.1
9.9
13.0
23.0