Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 138)

Publication 1394-IN002B-EN-P — February 2004
C-4 Catalog Numbers and Accessories
Motor Feedback Cables
1 High flex option for these cables is indicated by the letter T after CCU. For example, 1326-CCUT-RB-xxx.
2 IP67 environmental protection (single or double-ended) is available for these cables (used on -L motors) and
indicated by the letter L. For example, 1326-CCU-RBL-xxx.
MP-Series Motor Brake Cable
SERCOS Interface Fiber-Optic Cables
Use the following table to identify the SERCOS interface fiber-optic
cables for your 1394 system module. Connectors are provided at both
ends.
Note: Cable length (x-x) is in meters. Plastic cable is available in lengths up to 32 m (105.0 ft). Glass cable is
available in lengths up to 200 m (656.7 ft).
Motor Description Catalog Number
MPL-Bxxxx motors with resolver or high-resolution feedback
2090-CDNFDMP-Sxx
1326AB (M2L/S2L) motors with high-resolution feedback
1326AB and 1326AS motors
with resolver feedback
Single-ended 1326-CCU-xxx 1, 2
Double-ended 1326-CCU-D-xxx 1, 2
Bulkhead connector 1326-CCU-E-xxx
1, 2
Right-angle, shaft exit 1326-CCU-RA-xxx 1, 2
Right-angle, rear exit 1326-CCU-RB-xxx 1, 2
Double-ended bulkhead, flex (the -L
option is not available for this cable)
1326-CCUT-EE-xxx
Description Catalog Number
MP-Series motor brake cable, 0.75 mm
2
(18 AWG) 2090-UXNBMP-18Sxx
Description Catalog Number
SERCOS fiber-optic plastic cable (for use inside enclosure only) 2090-SCEPx-x
SERCOS fiber-optic plastic (PVC) cable (for use outside enclosure) 2090-SCVPx-x
SERCOS fiber-optic plastic (nylon) cable (for use outside enclosure in harsh
environments)
2090-SCNPx-x
SERCOS fiber-optic glass (PVC) cable 2090-SCVGx-x
SERCOS fiber cable bulkhead adapter (2 per pack) 2090-S-BLHD