Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 68)

Publication 1394-IN002B-EN-P — February 2004
3-14 Connecting Your 1394 SERCOS Interface System
For additional information refer to Power Specifications in Appendix A.
Refer to Appendix B for the 1394 interconnect diagrams.
ATTENTION
!
This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. You are required to
follow static control precautions when you install,
test, service, or repair this assembly. If you do not
follow ESD control procedures, components can be
damaged. If you are not familiar with static control
procedures, refer to Allen-Bradley publication 8000-
4.5.2, Guarding Against Electrostatic Damage or any
other applicable ESD Protection Handbook.
ATTENTION
!
To avoid personal injury and/or equipment damage,
ensure motor power connectors are used for
connection purposes only. Do not use them to turn
the unit on and off.
To avoid personal injury and/or equipment damage,
ensure shielded power cables are grounded to
prevent potentially high voltages on the shield.