Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 62)

Publication 1394-IN002B-EN-P — February 2004
3-8 Connecting Your 1394 SERCOS Interface System
Figure 3.4
Location of the 22 kW System Module Ground Jumper
Figure 3.5
22 kW System Module Jumper Positions
5. Close the system module door.
6. Go to Grounding Your 1394 SERCOS Interface System.
Ground Jumper
1394C-SJT22-D
Front edge
of board
Factory default jumper
position for a grounded
configuration
Jumper position on
ungrounded power
configuration
Front edge
of board