Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 39)

Publication 1394-IN002B-EN-P — February 2004
1394 SERCOS Interface Connector Data 2-7
Analog Output Connector
The following table provides the signal descriptions and pin-outs for
the analog output (9-pin) connector. Refer to Analog Output
Specifications on page 2-17 for analog output signal specifications.
Figure 2.5
Pin Orientation for 9-pin Analog Output Connector
Pin Description Signal
1 Test Point ANALOG_OUT_1
2 Test Point ANALOG_OUT_2
3 Test Point ANALOG_OUT_3
4 Test Point ANALOG_OUT_4
5 Common ANALOG_OUT_COM
6 N/C —
7 N/C —
8 N/C —
9 N/C —
Analog_Out_1
Analog_Out_2
Analog_Out_3
Analog_Out_4
Analog_Out_COM
N/C
N/C
N/C
N/C
1
9
1394 SERCOS interface
Control Board
1394C-SJTxx-D