Metrohm tiamo 1.0 Manual - Manual (Page 112)

88 Workplace
3.2.3 Show workplace
Select workplace in workplace symbol
In the left top corner of the workplace symbol the number of opened workplaces is
shown. If 2 or workplaces are open then the two workplaces that can be shown
beside each other or one below the other in the main window, can be selected by
using the workplace symbol.
A workplace is open and is shown in the main window.
Two workplaces are open. Normally only one workplace is
shown in the main window, but it is also possible to show
two workplaces beside each other or one below the other.
A click with the left or right-hand mouse key
on the workplace symbol opens a menu in
which the names of all the open workplaces
are shown. The workplaces shown in the
main window are indicated by a tick. If you
click on the required workplace then this will
be shown in the workplace window instead of
the previously selected workplace.
Show single workplace
The last workplace to have been opened is always shown alone in the main win-
dow as standard. If the display of 2 workplaces is switched on then it can be
switched back to showing a single workplace with the symbol
or the menu
item View, Unsplit .
Show workplaces beside each other
With the symbol or the menu item View, Tile horizontally two workplaces will be
shown beside each other in the main window.
Show workplaces one below the other
With the symbol or the menu item View, Tile vertically two workplaces are
shown one below the other in the main window.
3.2.4 Close workplace
With the menu item File, Close the selected workplace is closed.