5 tracks, 1 general, 2 track types – Metrohm tiamo 1.0 Manual User Manual
Page 321
Tracks
297
5.5 Tracks
5.5.1 General
Definition
A track is a sequence of a method consisting of commands. In addition to the
Main track existing in each method there are Normal tracks and special tracks
(Series start track, Series end track, Exit track and Error track). The normal track is
being called with a
CALL
command. The special tracks cannot be called but are
executed automatically on certain occasions.
Structure
Each track contains a
START
or
TRACK
command respectively and a
END
com-
mand. Between them as many commands as you like can be inserted.
Display
The individual tracks are arranged side by side. The track name is displayed in the
START
or
TRACK
command respectively as well as in the
END
command.
5.5.2 Track
types
Main track
The main track contains the main sequence of the method and exists in each
method. It starts with a start command
START
and finishes with a end command
END
. The method variables are defined in the start command. The end command
indicates the end of the method run. The main track can neither be deleted nor
moved.