Metrohm tiamo 1.0 Manual - Manual (Page 523)

Commands 499
Event/Status Type Meaning Commands
Cond Status
Conditioning is running ( COND BUSY or COND HOLD ); the Start
drift has not yet been reached.
SET , KFT , KFC
Condok Status
System is conditioned ( COND READY ); the Start drift has been
reached.
SET , KFT , KFC
Note
An
event can only be received if the RECEIVE command has been started befo-
re the event it is waiting for whereas a status can be scanned anytime.
Comment
250 characters, [ 'empty' ]
Comment about the event message.
TRANSFER
Command for data transfer via RS232 to external devices.
Appearance
The command has the following appearance:
Parameters
The parameters for the command TRANSFER are configured in the following dialog
window:
• TRANSFER
TRANSFER - properties
Command name
25 characters, [ Transfer # ]
Name of the command.