Metrohm tiamo 1.0 Manual - Manual (Page 498)

474 Method
Stirring rate
-15 ... [ 8 ] ... 15 (Titrando, 846, 814, 815)
0 ... [ 8 ] ... 15 (730, 774, 778, 789)
Setting the stirrer speed. The direction in which stirring takes place changes
as the sign in front of the stirrer speed changes.
Action
Switch on
[ on ], off
Switch on the stirrer. The stirrer keeps switched on after the command is
finished.
Switch off
on, [ off ]
Switch off the stirrer.
Duration
on, [ off ]; 0 ... [ 10.0 ] ... 9'999.9; s, [ min ]
Switch on the stirrer for a particular period.
RACK
Command for Initialization of the attached sample rack. The rack, lift and ro-
botic arm (if existing) are reset, the rack code is read off and the corresponding
rack data are transferred to the Sample Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815
Appearance
The command has the following appearance:
Parameters
The parameters for the command RACK are configured in the following dialog win-
dow:
• RACK
RACK - properties