11 communication commands, Ctrl – Metrohm tiamo 1.0 Manual User Manual
Page 515
Commands
491
5.6.11 Communication
commands
Commands for the communication within the program or with external devices.
The following four communication commands can be selected:
•
CTRL
Setting output lines.
•
SCAN
Scanning input lines.
•
SEND
Sending event messages.
•
RECEIVE
Waiting for event messages or status messages.
•
TRANSFER
Data transfer via RS232 to external devices.
CTRL
Command for setting remote output lines.
Devices
This command can be executed with the following devices:
Titrino: 751, 758, 784, 785, 795, 798, 799
Titrando: 808, 809, 835, 836, 841, 846
Coulometer: 756, 831
Sample Processor: 730, 774, 778, 789, 814, 815
Appearance
The command has the following appearance:
Parameters
The parameters for the command
CTRL
are configured in the following dialog win-
dow:
• CTRL
CTRL - Properties