Report – Metrohm tiamo 1.0 Manual User Manual
Page 513
Commands
489
REPORT
Command for the output of determination data.
Appearance
The command has the following appearance:
Parameters
The parameters for the command
REPORT
are configured in the following dialog
window:
•
REPORT
Note
A
REPORT
command has to be placed before a
DATABASE
command. Otherwise
the command data (for example the report template used) are not stored and a
Reprocessing won't be possible then.
REPORT - Properties
Command name
25 characters, [ Report # ]
Name of the command.
Report template
Report template
Report templates
Selecting the predefined Report template which the report should be gen-
erated with.
Report output
Printer
[ on ], off
The report is printed to the selected printer if this option is activated.
PDF file
on, [ off ]
The report is stored as PDF file in the directory selected if this option is acti-
vated. A click on
opens the window
Save
for selection of the desired di-
rectory and entry of the root name for the PDF file.